| |
| | | |
| | | |
| For
your convenience, we have saved our Pressed Steel Fittings
Catalogue as a PDF File that you
can download and view using Adobe Reader software. You
may download information on any of our product range by downloading the PDF file.
The PDF file can be opened using Adobe Reader 5.0 or higher. You can
also download Adobe Reader by clicking on the Icon (Get Adobe Reader), it's free.
These PDF file needs to be saved to disk. Please right-click
and select 'Save Target As' or simply download.
| | |
|
| |
|
| Joint
Pin
Designed for internal 'end-to-end' connection of standard scaffold
tube.
Weight: 0.85kg
Conforms to BS1139 Part 2 1982 |
Putlog
Head
Quickly converts a standard scaffold tube into a putlog, enabling maximum
utilisation of scaffold tube stocks.
Weight: 0.54kg |
| | |
| | |
| | |
| |
|
| | |
Roofing
Coupler
Designed for 'hole-free' rapid clamping of scaffold
tube above and below corrugated sheeting.
Weight: 1.41kg
Roofing Coupler
The galvanised steel
or plastic coated sheet has a corrugation pitch of 76.2mm and thickness
of
0.5mm to 0.7mm | Sleeve
Coupler A
one piece heavy duty coupler for rapid connection featuring a central baffle plate
for correct tube positioning and unique individual one side unlocking safety feature.
Weight: 1.13kg Conforms
to BS1139 Part 2 1982.
Safe working loads to BS5973. Tension
load: 3kN |
| |
| | |
| |
|
| Fixed
Base Plate (Socket Type)
Made out of 150 x 150 x 6 mm base
plate with 75 mm socket designed to receive 48.3 mm OD tube. |
Fixed
Base Plate (Pin Type)
Base Plate
A 120
mm x 120 mm steel plate providing a full bearing surface for load distribution
from vertical. |
| |
|
|
|
|
|
Patent
Clamp This
is a highly economical fitting for fastening scaffolding tubes to girders with
a single bolt. Suitable for loads at right angles to flanges only. Must be used
in pairs. |
| | |
| | |
